Header: Header: Header:

Taking The Pulse Of Optimism

Article by Rich Donnell, Editor-In-Chief, Timber Processing June 2019

Once again we present the Softwood Lumber Sawmill Operations and Capital Expenditure survey results. Again, this is a survey of U.S. softwood lumber operations. We receive a sprinkling of sawmillers from Canada and overseas who go ahead and complete the survey, but we remove their answers from the final tallies, though we’re very interested in what they have to say and appreciate their participation. We have considered expanding the survey to include our friends up north and abroad, and may do so somewhere down the road. We also try to eliminate any duplicate responses—that is, if different officers from the same mill took the survey, we’ll knock out one of those.

As we’ve said in the past, this survey isn’t perfect science, but it provides an accurate glimpse at how things stand at that moment in time when lumbermen completed it, which in this case was during April-May, when lumbermen on our e-mail address list were asked to participate and provided a link to the on-line, 23-question survey. One thing I like about the survey is that it brings in sawmillers large and small, from those producing 200-300MMBF annually to those knocking out less than 10MMBF a year, from the vice president in charge of three mills to the small business owner who may not even run his mill five days a week.

A quick glance through the survey results revealed that while obviously the bigger mills are spending more money on capital projects than the smaller guys, the expectations and concerns of the bigger and smaller operations are very similar.

As you’ll read in the article, we put a lot of emphasis on how the lumbermen are feeling about their business this year and into next year. It’s the same question we have asked in this survey every spring for many years.

We define as being optimistic those who have checked the excellent or good boxes with regard to their expectations for the immediate future. Another box they can check off is called “fair,” but we don’t consider “fair” as being optimistic.

A significant 69% who took the survey said their business is in excellent or good shape for the remainder of 2019 and going into 2020. I remember at the end of the recession when that number was closer to 25%, and even that seemed high.

However, while 69% is impressive, it’s not as optimistic as the lumbermen were in 2018 (89%) or 2017 (87%), which were significant jumps from the optimism of 2016 (66%).

Perhaps the most telling numbers inside that 69% is that 15% said excellent and 54% said good, whereas last year 35% said excellent and 54% said good. Where did the difference go? Many “excellent” slipped down into the “good” condition, and many who were “good” last year fell into “fair” condition this year.

We may be guilty of focusing on a little bit of negative in what are generally positive results, but the important question is whether this is the beginning of a trend in declining optimism. We’ll have to wait for next year’s survey to get a handle on that; oh yeah, the housing and building markets for the remainder of this year may have a little bit to do with it, too.

RELATED ARTICLES

GOOD TIMES DON’T LAST LONG SOMETIMES

Survey Says: Lumbermen Are Feeling The COVID-19 Pinch

Latest News

Cooper Machine Partners With EWD

Cooper Machine Co., a long-established manufacturer of quality sawmill equipment located in Wadley, Ga., announced that it is partnering with German-based sawmill machine manufacturer EWD Sagetechnik. Cooper Machine has been offering equipment for sawmill, pallet, and post and pole mills since 1965. The company is in its third generation of successful management…

Canfor DeRidder Has Log Cranes In Place

Fulghum Industries, Inc. reports the commission of two recently installed 170 ft. 45-ton log cranes for Canfor. The cranes will be feeding the new $160 million sawmill at DeRidder, La…

New Pellet Mill Entices Area Sawmills

Some Georgia sawmills will have a new market for their byproducts as Spectrum Energy Georgia LLC plans to begin construction this summer of the largest industrial wood pellet facility in the world at Adel, Ga. and expects to commission the plant 12 months later, or summer of 2024. The plant will operate at the site of an idled particleboard facility. The plant will have the ability to receive and process all forms of biomass, including sawmill residues (chips, sawdust and shavings), pulpwood, top wood, and in-woods chips…

Your Tax Dollars Not At Work

Article by Rich Donnell, Editor-in-Chief, Timber Processing March 2023 –You may be aware of our affiliate magazine, Panel World, which covers the structural and non-structural wood panel industries in a similar way that Timber Processing covers the lumber industry. Recently in Panel World we ran a…

Find Us On Social

Newsletter

The monthly Timber Processing Industry Newsletter reaches over 4,000 mill owners and supervisors.

 

Subscribe/Renew

Timber Processing is delivered 10 times per year to subscribers who represent sawmill ownership, management and supervisory personnel and corporate executives. Subscriptions are FREE to qualified individuals.

Advertise

Complete the online form so we can direct you to the appropriate Sales Representative.