Spruce Products Ltd. Goes With Valutec TC Continuous Kiln
At a time when low-cost mass production solutions are the norm, it’s worth remembering why custom products from specialized companies will always have their place. When sawmill plant manager Rod Pidskalny and the team at Spruce Products Ltd. (SPL) in Swan River, Manitoba, Canada, went looking to replace two aging batch kilns they were keen to explore continuous dry kiln technology.
The SPL team soon ruled out traditional CDKs without door closures, fearing they would lose efficiency. Six months of designing a solution with Valutec landed them with a stainless steel TC continuous kiln with eight drying zones that can handle 60MMBF annually—well over their mill’s current demands. “We can now dry everything we can produce, plus we’ve got capacity built in with the kilns to dry a little more. We have some future expansion possible,” Pidskalny says, adding, “It’s been performing very well. We were looking for a 2.5% uplift in grade outturn, that was our goal, and we’ve actually met that. We think it’s a little higher than that.”
Beyond grade outturn, Pidskalny says they’ve noticed a significant decrease in drying defects, which has directly benefited their planer operations. They’ve seen fewer planer jams, cross-ups at the lug loader and generally smoother runs, particularly with 2x4s.
Valutec is the only company offering TC kiln—a kiln type that comes with distinguishing features such as low energy consumption, high flexibility and superior capacity. It gives the operator the possibility to create the ultimate drying process with freedom to mix dimensions, minimal moisture content variation and reduced risk of checking. Annual capacity can reach 150MMBF with target moisture contents down to around 12-18% with a standard deviation of 1%. The principle is based on the timber package being fed lengthwise through zones in which the air circulates laterally across the drying channel. This enables the separate regulation of the climate in different zones according to a schedule that comes very close to the ideal schedule of a batch kiln.
ICT was originally established in 1978 as an offshoot of the Langdale Co., but has since expanded and diversified to become a regional leader in cutting solutions.
Latest News
Bill Would Boost Rural Communities
The 21st Century Conservation Corps for Our Health and Our Jobs Act recently introduced by U.S. Sen. Ron Wyden (D-Ore.) provides more than $15 billion for a wide variety of public lands projects that benefit rural…
Klausner Files Bankruptcy
Following several years of below capacity operation and controversy, Klausner Holding USA, owner of sawmills in Enfield, NC and Live Oak, Fla., filed for Chap. 11 bankruptcy in early May, claiming more than $100 million in debt, after the…
Remaining Hopeful
Article by Jessica Johnson, Senior Associate Editor, Timber Processing May 2020 – I am grateful that everyone I’ve talked to in the industry is healthy and operating, if not at a normal pace at least somewhere in the ballpark. Some places are feeling…
Microtec Purchases Lucidyne Technologies
In a move that creates one of the largest wood products scanning companies in the world, Microtec has acquired Lucidyne Technologies, Inc. Microtec has been delivering technologically advanced scanning and…
Find Us On Social
Newsletter
The monthly Timber Processing Industry Newsletter reaches over 4,000 mill owners and supervisors.
Subscribe/Renew
Timber Processing is delivered 10 times per year to subscribers who represent sawmill ownership, management and supervisory personnel and corporate executives. Subscriptions are FREE to qualified individuals.
Advertise
Complete the online form so we can direct you to the appropriate Sales Representative.