Franklin Startup Brings Back Memories of New Sawmill
Article by Rich Donnell, Editor-In-Chief, Timber Processing April 2014
We’ve been reading a lot about Canadian forest products companies buying southern pine sawmills. We haven’t read so much about U.S. independent ownerships taking over formerly corporate sawmills. But our cover story in this issue, which begins on page 14, is about three partners who formed Franklin Lumber LLC and have re-started up the southern pine sawmill at Franklin, Va. In 2013 their new entity purchased the mill from International Paper, which had shut it down in 2009. Of course before IP took over the mill, it ran under the Union Camp flag. Not surprisingly, as the article written by our reporter David Abbott notes, is that the mill equipment is about the same as it has been for some time.
This caused me to reflect a little on when, in December 1987, this magazine published the first article on the new Franklin sawmill. I was managing editor at the time and we had been following the evolvement and startup of the sawmill project. Finally we received the “okay” from Union Camp and we sent reporter Mike Caswell up to do the article. It was also the 100th anniversary since the Camp family had operated a sawmill in Franklin.
The much anticipated $16 million project had begun construction in late 1984 and while it was going on Union Camp dismantled an adjacent Chip-N-Saw and bandmill sawmill. The log yard was converted from multiple length to treelength and a second crane was installed. The mill started up in December 1986.
Bill Skipworth was production manager at the time at Union Camp. The project and startup went so smoothly that Skipworth commented, “The only disappointing thing is that we only get to do this once.”
Skipworth worked closely with engineering consulting Bill Bowlin of The Bowlin Co., based in Shreveport, La. Bowlin was instrumental in the design and implementation of new technologies at many sawmills during the production surge of the 1980s in the Southern U.S.
Bowlin said about the new Franklin mill, “It’s one of the least manpower intensive, most attractive I’ve seen.”
The mill, which produced 100MMBF annually, featured the classic Log Boss sharp chain/McDonough twin band/Schurman chip heads primary breakdown with Applied Theory scanning and optimization. Every main sawing station included scanning and optimization, and perhaps most unique was that the mill not only ran the twin band for primary breakdown, but broke down cants with a twin and also sawed doubles with a vertical twin band resaw, and then of course there was the bandmill on the large log carriage side.
I remember that Union Camp also did considerable work with its filing room and our magazine featured their sawing program in 1989. The filing room was a spacious 26×110 ft. and had been built in the basement below the mill floor in order to minimize vibration from the sawmill. The saw filing supervisor was Sam Butler, who was a 42-year employee of Union Camp at Franklin.
Our writer, Mike Tankersley, asked Butler to gauge the importance of the filing room to the new modern sawmill. Butler’s response: “You take the saw out of the word sawmill, and all you’ve got left is a mill.”
Certainly the new owners of the Franklin sawmill have a great foundation and tradition beneath them. Best of luck to them.
Latest News
Sawmillers Show Up At EXPO
After six shows in Atlanta, Ga. dating back to 2011, the Southern Forest Products Assn., host of the biennial Forest Products Machinery & Equipment EXPO, decided to move the 37th edition to Nashville, Tenn. Held August 23-25, this was an exciting change for exhibitors and attendees alike—the Music City Center was in the heart of the city, allowing everyone the chance to not only walk from the variety of hotels and top-notch restaurants to the show floor but also enjoy all that Nashville has to offer by way of its world-famous music scene…
Single-Family Starts Lead U.S. Housing Rebound In July
U.S. housing starts increased in July to a seasonally adjusted rate of 1.452 million, nearly 4% above June (and 6% above July a year ago). Single-family housing starts in July were at a rate of 983,000, 6.7% above June, while multi-family starts were 460,000, even with June, according to the U.S. Census Bureau and U.S. Dept. of Housing and Urban Development monthly new residential construction report…
Weyerhaeuser Partnership Focuses On Firefighter Mental Health
Weyerhaeuser Co. and Firefighter Behavioral Health Alliance (FBHA) announced an expanded partnership on Fighting Fires Together, a campaign that provides support for wildland firefighters and their families. In its second year, the program is designed to provide resources and increase awareness around the importance of mental health assistance for these first responders…
Find Us On Social
Newsletter
The monthly Timber Processing Industry Newsletter reaches over 4,000 mill owners and supervisors.
Subscribe/Renew
Timber Processing is delivered 10 times per year to subscribers who represent sawmill ownership, management and supervisory personnel and corporate executives. Subscriptions are FREE to qualified individuals.
Advertise
Complete the online form so we can direct you to the appropriate Sales Representative.